MQTT
LED Control

LED Control

Control the RGB LEDs on the device via MQTT.

Topic

Publish to: api_client/<client_name>/<location_id>/<device_id>/led/set

Payload 

{
  "animation": "breathe",
  "red": 255,
  "green": 255,
  "blue": 255,
  "brightness": 255,
  "durationMilliseconds": 3000
}
  • animation: Type of animation to apply to the LEDs. Possible values include:
    • on: Turn on the LEDs regardless of rgb and brightness values.
    • off: Turn off the LEDs regardless of rgb and brightness values.
    • breathe: Smoothly cycles between min and max brightness. The brightness value is ignored in this mode.
  • red, green, blue: RGB values for the LED color, each ranging from 0 to 255.
  • brightness: Overall brightness of the LEDs, ranging from 0 to 255.
  • durationMilliseconds: Duration for which the LEDs should remain on, in milliseconds. Set to 0 for continuous illumination until the next command is received.
⚠️ LEDNetwork